As electrical industry grows with bigger demands and supplies, electrical high voltage insulators has entered a new stage of production furious. More and more factories in India, big or small, has smelled the chance and are eager to grasp the profit. When we talk about power construction, we feel difficult to ignore an important electrical […]
Contune International Corporation and her collaborating factory will attend IEEE PES T&D Conference and Exposition in Danver,Colorado,USA from 17th to 19th April. Our booth no.:907 By our manufacturer name: Zibo Qianheng Automation & Engineering Co.,ltd Here we have our staff to introduce our testing machines and production machines of composite insulator, ceramic insulator and glass […]
Last time we talked about sample test of silicone composite insulator for AC system above 1KV, the IEC 61109:2008 has defined it clearly. Today let’s the coming section”routine test” of polymeric insulator in this IEC 61109: 13 Routine tests 13.1 Mechanical routine test Every insulator shall withstand, at ambient temperature, a tensile load at RTL […]
Sample test is a major method of insulator acceptance inspection for mass production. It is widely used by inspectors of insulators from manufacturers, power girds and electrical laboratories. Here we have definition, rules, test method and acceptance criteria of composite insulator of suspension type and tension type of international standard IEC 61109:2008 “spension and tension […]
Damage limit proof test and test of the tightness of the interface between end fittings and insulator housing,these two tests are two of the most important test in inspection process of composite insulator. Here is how international standard IEC 61109:2008 “Suspension and tension insulators for AC system with a nominal voltage greater than 1000V” defines these 2 […]
After end fittings of HV insulators have been crimped onto the core by crimping machine, the entire electrical insulators are supposed to be able to bear certain specific mechanical load as they will be used on overhead lines to support conductors and other line fittings. Here let’s see how international standard IEC 61109 defines such […]
As we know,high voltage insulators shall subject to mechanical failing load test, and when we mention “test in vertical position and horizontal position”, this more refer to suspension insulator, tension insulator, post insulator and pin insulator. The suspension and tension insulator are normally tested in horizontal direction, as they are long in shape, with length […]
End fitting of railway insulator of Indian market The end fittings of silicone composite insulator for 25KV railway overhead traction have specific requirements. The end fittings shall be made of spheroidal graphite cast iron to grade: 400/15 of IS:1865-1991 or forged steel fittings to BS-970(Part-II). Approval of the type test of the insulator implies employment […]
Name：Mechanical failing load tester for insulator (Cantilever & Tension) Other name: Cantilever/Tension failing load tester for ceramic/polymeric/glass insulator Introduction: This Mechanical failing load tester is designed to do type test and sample test on high voltage electrical insulators, testing their mechanical performance of cantilever failing load and tensile failing load. It is also called bending testing machine sometimes for […]
What is universal testing machine? Universal testing machine (UTM) is a testing machine specifically designed for multi-function tests. It is applied on tests of metal, non-metal, composite material, whose testing function include but not limit to common mechanical tests like tension, compression, bending, cutting, tearing and etc. UTM is also can be used on tests of […]