Our Products
Rubber injection molding machine
Rubber injection molding machine is a production for composite insulators, injecting silicon rubber into molds to make polymeric housing of composite insulators
Zinc thickness test device
Zinc thickness test device is a portable test equipment for zinc coating thickness of metallic fitting of high voltage insulators.
CRIMPING MACHINE 140 FOR COMPOSITE INSULATORS
Crimping machine is applied in the production line of high voltage composite insulators. The model no.CTCPM-140 is available for insulators with voltage from 11kV to 33kV, including all types of composite insulators.
Combined Electro-Mechanical Strength Tester of Insulators
A combined electromechanical strength test is a significant test for electrical ceramic disc insulators of overhead lines. This testing machine is essential for the manufacture of porcelain insulators to inspect and control quality.
Water diffusion test device for FRP core
The water diffusion test device is to test the leakage current and withstand property of the FRP/ECR core of composite insulators under AC voltage after boiling in salty water. This test is defined and required in the IEC standard for tests of composite insulators.
CRIMPING MACHINE 165 FOR COMPOSITE INSULATOR PRODUCTION
The crimping machine is applied in the production line of high voltage composite insulator (polymer insulator) to crimping metallic end fittings to FRP of the insulator. Model 165 is available for an insulator with voltage up to 800KV
Tracking & Erosion Test Machine of Polymer insulators
Tracking & Erosion tester is used for tests of silicon rubber shed and housing of electrical polymeric insulators. It is to test the anti-tracking and erosion ability of its silicon rubber material as per IEC or DIN EN standard.
Porosity Testing machine of Ceramic Insulators
The insulator porosity test machine is to inspect the porosity property of the HV porcelain insulator under a constant high-pressure environment with dye penetration.
FRP testing machine for thermal-sock test
Thermal shock test for ceramic disc insulators as per IEC 60383 Clause 15.1 in heated air and cold water with temperature deviation of 50K.
Insulator Testing Machine of Thermal-Mechanical Stress
The thermal-mechanical stress test is a sample test for composite insulators and porcelain insulators required in IEC. It tests insulators with the cycling of high temperatures and low-temperature environments.